Arcam SA10 Integrated Amplifier

£699.00 inc.VAT

The design of the HDA range draws upon all of Arcam’s experience as one of the UK’s most respected audio companies, to produce Arcam’s best performing range of audio products yet – using the best quality components and engineering practices, the HDA range is designed and built to give you years of listening enjoyment.

In stock

SKU: Arcam SA10 Categories: , , Tag:

In any amplifier, the signal path is at the mercy of anything that creates noise within the unit. Thus, we spare no expense in using only the most high-quality components, even if it means the cost of our power supplies overtaking that of everything else.

A singer’s sharp intake of breath before hitting the chorus, a guitarist’s fingers sliding against the strings – it’s those seemingly minor details that can bring music to life. Fish out one of your all-time favourite albums and play it through a Bluetooth speaker, and guess what? It sounds like a Bluetooth speaker. Play it through the SA10, and it’s as close to hearing the artist’s performance as you’re likely to get. There’s always joy in digging out an old recording you haven’t heard in years. With the HDA range, it’ll feel like hearing it for the first time.

  • Extremely efficient class A/B amplification
  • 50W of power per channel
  • 5 analogue inputs including phono
  • 3 digital inputs
  • 32-bit DAC,Sabre ESS9016K2M
  • Full I/P control
  • Total harmonic distortion + noise = 0.003%
  • Continuous power output (0.5% THD), per channel

    Both channels, 8Ω, 20Hz—20kHz – 50W
    Both channels, 4Ω, at 1kHz – 85W
    Harmonic distortion, 80% power, 8Ω at 1kHz – 0.003%

    Analogue Inputs

    Phono (MM) cartridge:
    Input sensitivity at 1kHz – 5mV
    Input impedance – 47kΩ + 100pF
    Frequency response (ref. RIAA curve) – 20Hz – 20kHz ± 1dB
    Signal/Noise ratio (A-wtd) 50W, ref. 5mV input – 80dB
    Overload margin, ref. 5mV at 1kHz – 21dB
    Line Inputs:
    Nominal sensitivity – 1V
    Input impedance – 10kΩ
    Maximum input – 6Vrms
    Frequency response – 20Hz – 20kHz ± 0.2dB
    Signal/Noise ratio (A-wtd) 50W, ref. 1V input – 106dB

    Digital Inputs

    DAC – ESS9016K2M
    Frequency response – 20Hz – 20kHz ± 0.05dB
    Total harmonics distortion + Noise – 0.0007%
    Signal/Noise ratio (A-wtd) – 115dB
    Supported sample rates:
    Optical – 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz
    Coaxial – 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
    Bit depth – 16-bit – 24-bit

    Pre-amplifier output

    Nominal output level – 630mV
    Output impedance – 230Ω

    Headphone output

    Maximum output level into 600Ω – 5Vrms
    Output impedance – 1Ω
    Load range – 16Ω – 2kΩ

    General

    Mains voltage – 110–120V or 220–240V, 50–60Hz
    Maximum power consumption – 350W
    Dimensions W x H x D (including feet, control knob and speaker terminals) – 433x87x310mm
    Weight (net) – 8.4kg
    Weight (gross) – 10.7kg
    Supplied accessories:
    – Mains leads
    – Remote control
    – 2 x AAA batteries

    Reviews

    There are no reviews yet.

    Be the first to review “Arcam SA10 Integrated Amplifier”

    Your email address will not be published. Required fields are marked *