ATC P6 Stereo Active Power Amplifier

£19,750.00 inc.VAT

The ATC P6 is a Dual-Mono 3-way design (total 6 channels).

Available in-store only

SKU: ATC P6 Category: Tag:

ATC P6 Stereo Active Power Amplifier

The ATC P6 is a dedicated amplifier for the EL150 but can be used with all ATC 3-way products with an ATC adaptor kit.

ATC P6 features

  • Dual-Mono 3-way design (total 6 channels).
  • 2 x 350W total output power (2x (200W LF, 100W MF, 50W HF)).
  • Ultra low noise discrete design throughout.
  • 3-way active crossovers with phase equalization.
  • Billet and extruded aluminium chassis construction.
  • 6 year warranty.

About ATC

ATC was formed in 1974 by Billy Woodman to manufacture custom drive units for the professional sound industry, they quickly made their mark with the 12″ PA75-314 driver, a design capable of handling more power and producing less distortion at a higher sound pressure level than any other unit on the market.

1976 saw the first production of the ground-breaking SM 75-150s soft dome midrange driver, a technical tour-de-force, whose innovative up-scaled design reproduced a more uniform dispersion, wider bandwidth and much lower distortion than was thought possible at the time. It revolutionised studio monitoring and has since become recognised as the ultimate mid-range transducer for both domestic and professional applications. Utilising exotic materials and precision tolerances, the latest version of the SM 75-150s represents the apex of drive unit technology. It is often copied but never equalled.

Through ATC’s commitment to multi-channel mastering and its direct involvement with leading players in the professional audio industry including Sony Music and Telarc, ATC’s products are installed at some of the world’s most prestigious multi-channel studios and auditoria. Where ever the best is required you will find ATC.

Through ATC’s commitment to multi-channel mastering and its direct involvement with leading players in the professional audio industry including Sony Music and Telarc, ATC’s products are installed at some of the world’s most prestigious multi-channel studios and auditoria. Where ever the best is required you will find ATC.

Specifications

Output Power/Stereo Ch. (RMS):
HF:
50 Watts into 6 ohms

MF: 100 Watts into 16 ohms
LF: 200 Watts into 8 ohms
Input Sensitivity: 1V RMS
Input Impedance: 5k ohms
Frequency Response: 5Hz – 200KHz ±0.1dB (ignoring mid amp filters)
Signal / Noise Ratio: Better than 105dB
TDH: Better than 90dB/0.0032%
Power Requirements: Voltage: 110, 115, 230
Frequency: 50/60Hz (region dependent, factory set)
Dimensions (HxWxD): 427x634x318mm
Weight: 50.5kg/111.1lbs

Reviews

There are no reviews yet.

Be the first to review “ATC P6 Stereo Active Power Amplifier”

Your email address will not be published. Required fields are marked *