Dynavector DV XX2 MKII MC Cartridge

£1,295.00 inc.VAT

The DV XX-1 was the first cartridge to feature a “magnetic flux damper” (patent) and softened magnetism” (patent) processes that reject the magnetic fluctuation that is detrimental to a moving coil cartridges performance.

In stock

SKU: Dynavector DV XX2 MKII Categories: , , Tag:

Dynavector DV XX2 MKII MC Cartridge

The Dynavector DV XX2 MKII retains the benefit of the flux damper but features the Alnico-5 magnet and the similar rigid construction to the Te Kaitora Rua. Alnico magnets exhibit high magnetic flux density combining with a low coercive therefore magnetic resistance is lower than other magnetic types such as rare earth and ferrite, providing the exceptional stability of the XX-2 MKII output voltage. There is also the additional advantage of low magnetic and electrical resistance contributing to a discernable improvement in sound quality.

The DV XX 2MKII also exhibits deep powerful bass, treble is both clear and lively possessing none of the hardness found in many moving coil designs.

The XX 2MKII also features a 6 mm solid boron cantilever fitted with a Pathfinder Line contact stylus. PCOCC (pure copper ohno continuous casting process) copper wire is used for the coil. The output voltage of 0.28mV is higher than that of the XX-2 and 6 ohms impedance are suited to most moving coil phono stages.

For ridgity of construction the XX-2 MKII cartridge body is machined from 7075 aluminium the hardest available. However, having only a total weight of only 8.9 grams it is suitable for a variety of popular tonearms.

Dimensions of XX2mkII MC Cartridge

About Dynavector

Dynavector, based in Tokyo, was founded in the mid-1970s by Dr. Tominari, a Physics Professor at Tokyo University. His lifelong interest in music, combined with his scientific background, has helped produce some ground breaking products over the past few decades.

For more than 30 years, Dynavector’s Moving Coil cartridges have enjoyed worldwide acclaim due to a combination of innovative design, advanced production techniques and an unwavering commitment to the musical source. Dynavector have been leading the way in moving coil cartridges, offering a range to suit all budgets but all guaranteed to offer performance that will get the most from your vinyl collection

Dynavector is highly regarded as a manufacturer of the finest high-performance moving coil phono cartridges and
a unique bi-axial tonearm based on technically advanced theories and unique production technologies.

Specifications

Type Low output moving coil cartridge with Alnico magnet and Flux damper
Output Voltage 0.28mV (at 1KHz, 5cm/sec.)
Channel Separation 30 dB (at 1KHz)
Channel balance 1.0 dB (at 1KHz)
Frequency response 20 – 20,000Hz (± 1dB)
Compliance 10 mm/N
Tracking force 1.8 – 2.2 g
Impedance 6 ohms
Recommended load impedance > 30 ohms
Cantilever 6mm length 0.3 mm dia. solid boron
Stylus tip PF Line contact shape, stylus radius: 7 x 30 micron
Weight 8.9 g

Reviews

There are no reviews yet.

Be the first to review “Dynavector DV XX2 MKII MC Cartridge”

Your email address will not be published. Required fields are marked *