Martin Audio SX1100 Ultra-Compact Subwoofer

£478.80£838.80 inc.VAT

The SX110 is an slimline subwoofer designed for applications that call for increased impact and low frequency performance in a visually unobtrusive enclosure. Its very small size makes it perfectly suited to installed sound applications where space is limited such as under banquette seating.

Clear
SKU: Martin Audio SX110 Categories: , Tag:

The SX110 features a 10” (250mm)/2” (50mm) voice coil driver and generously sized low frequency port for reduced air noise. An ideal subwoofer to augment the bass output of ADORN Series or small CDD loudspeakers, it can be used on the ground or flown using integral M8 inserts.

The SX110 enclosure is constructed from plywood and finished in black or white textured paint as standard. An impact-resistant perforated steel grille protects the drivers, and rubber feet on the base resist movement.

When used with Martin Audio full-range systems, crossover and EQ functions can be performed by the DX0.5 or DX4.0 system controller.

Features
Slimline direct-radiator subwoofer
1 x 10” (250mm) driver with 2” (50mm) voice coil
Large port for reduced air noise
Perforated steel grille
8Ω nominal impedance
M8 flying inserts

Applications
Retail outlets
Cafes, bars and restaurants
Museums and Houses of Worship
Fitness clubs
Educational facilities
Hotels and convention centres

Colour

Black, Custom Colour, White

Specifications

Type – Slimline, direct radiating subwoofer
Frequency Response:
– 50Hz-150Hz ± 3dB,
– -10dB @ 42Hz
Driver – 1 x 10” (250mm)/2” (50mm) voice coil, long excursion, ferrite magnet
Rated Power – 250W AES, 1000W peak
Recommended Amplifier – VIA 2502
Sensitivity – 97dB
Maximum SPL – 121dB continuous, 127dB peak (half space)
Nominal Impedance – 8Ω
Dispersion (-6DB) – Omnidirectional
Crossover – 80-120Hz active
Enclosure – Plywood
Finish – Black, White or Custom
Protective Grille – Perforated steel
Connectors – 2 x NL4 type
Pin Connectors (Input) – +1, -1 Link through: +2, -2
Pin Connectors (Link) – +1, -1 Link through: +2, -2
Fittings – 12 x M8 inserts
Dimensions (Incl Feet):
– (W) 417mm x (H) 297mm x (D) 415mm
– (W) 16.4ins x (H) 11.7ins x (D) 16.3ins
Weight – 12kg (26.5lbs)

Architectural Specs

The loudspeaker shall be an ultra-compact subwoofer consisting of a 10” reflex-loaded, long-excursion, low frequency transducer.

The on-axis frequency response shall be 50Hz-150kHz +/- 3dB and the loudspeaker shall produce a maximum SPL of 127dB peak calculated at 1 metre. Power handling shall be 250W AES, 1000W peak. Rated impedance shall be 8 ohms. The rear connector panel shall be fitted with two NL4 type connectors and the loudspeaker shall be operated in conjunction with a dedicated electronic controller or amplifier.

The enclosure shall be made from plywood and fitted with M8 threaded inserts for attachment to suspension hardware. The drivers shall be protected by a perforated steel grille.

Dimensions (W x H x D) including feet shall be 417mm x 297mm x 415mm (16.4in x 11.7in x 16.3in). Weight shall be 12kg (26.5lbs).

The loudspeaker shall be the Martin Audio SX110.

Reviews

There are no reviews yet.

Be the first to review “Martin Audio SX1100 Ultra-Compact Subwoofer”

Your email address will not be published. Required fields are marked *