IsoAcoustics OREA Series Isolation Pucks
OREA Series: Eliminates parasitic vibrations and provides greater sound clarity and focus. The OREA’s are ideal for electronic components including Amplifiers, DAC’s, CD Players, Speakers, and Turntables.
Made of machined stainless steel, these isolators have a low-profile design to minimise any increase in height.
Sold singly
Category Isolation
Country Canada
Manufacturer IsoAcoustics
-
OREA Graphite
Dimensions (WxDxH)
1.6″x1.1″ (40x27mm)
Tilt
No
Weight Capacity
4lbs (1.8kg) per unit
Quantity
1 Unit (Single)
OREA Bronze
Dimensions (WxDxH)
2″x1.1″ (50x29mm)
Tilt
No
Weight Capacity
8lbs (3.6kg) per unit
Quantity
1 Unit (Single)
OREA Indigo
Dimensions (WxDxH)
2.3″x1.3″ (58x33mm)
Tilt
No
Weight Capacity
16lbs (7.2kg) per unit
Quantity
1 Unit (Single)
OREA Bordeaux
Dimensions (WxDxH)
2.6″x1.4″ (67x36mm)
Tilt
No
Weight Capacity
32lbs (14.5 kg) per unit
Quantity
1 Unit (Single)
-
Free Delivery within Mainland UK.
60-Day Money-back Guarantee
Returns Policy
IsoAcoustics OREA Series Isolation Puck
Each IsoAcoustics OREA model is designed with a different weight capacity. They each have a coloured ring on the bottom isolator that denotes the model and weight capacity. The OREA series are packaged individually to allow greater flexibility when determining the number of units to use. We recommend a minimum of 3 units under each component, depending on weight.
Greater sound clarity
The upper flange of the OREA’s are designed to provide a suction cup like effect and adhere to the underside of the component, while the lower flange adheres to the supporting surface. All the energy is managed within the core of the OREA’s, which are tuned to work within specific weight ranges. This results in greater sound clarity and a more open soundstage providing authentic, three-dimensional sound.
Works with or without feet
The existing feet on an audio component may connect well and fit nicely around the perimeter of the OREA isolator. Alternatively, you may get better performance by either removing the feet entirely or placing the OREA’s beside the existing feet to have them connect directly to the chassis or base of the component.
IsoAcoustics OREA Weight Capacity
The OREA’s are designed to be used in multiples to match the weight of the component or speaker. The total weight capacity is calculated as follows:
Total Weight Capacity = [Weight cap. per isolator] x [Qty of Isolators]
QUANTITY OF ISOLATORSGRAPHITE 4LBS (1.8KG) / UNITBRONZE 8LBS (3.6KG) / UNITINDIGO 16LBS (7.2KG) / UNITBORDEAUX 32LBS (14.5KG) / UNIT
312 lbs. (5.4 kg)24 lbs. (10.8 kg)48 lbs. (21.6 kg)96 lbs. (43.5 kg)416lbs (7.2 kg)32lbs (14.4 kg)64lbs (28.8 kg)128lbs (58 kg)520lbs (9 kg)40lbs (18 kg)80lbs (36 kg)160lbs (72.5 kg)624lbs (10.8 kg)48lbs (21.6 kg)96lbs (43.2 kg)192lbs (87 kg)
It is common to use 3 or 4 OREA isolators for each component or speaker, but keep in mind that it is most important to stay within the weight capacity of the OREA isolator.
The weight distribution of the component can also be taken into account. If for example the component is heaviest at the back, then it is common to use 3 isolators with 2 positioned at the back corners and 1 positioned front/center.
