Lyra Delos Moving Coil Cartridge
An analogue LP played back with an MC cartridge can sound exceptionally good. Normally, the more cost put into the cartridge, the better the sound.
However, sometimes what is required is not more cost but more clever engineering, as with the Lyra Delos.
Category Cartridges
Country Japan
Manufacturer Lyra
-
Designer
Jonathan Carr
Builder
Yoshinori Mishima (final build, testing), Akiko Ishiyama (primary build)
Type
Medium weight, medium compliance, low-impedance moving coil cartridge
Stylus
Namiki microridge line-contact nude diamond stylus (2.5um x 75um), surface-mounted
Cantilever system
Solid boron rod with short one-point wire suspension, directly mounted into cartridge body
Coils
3-layer deep, 6N high-purity copper, square-shaped high-purity iron former, 6.3ohm self-impedance, 9.5uH inductance
Output voltage
0.6mV@5cm/sec., zero to peak, 45 degrees (CBS test record, other test records may alter results)
Frequency range
10Hz ~ 50kHz
Channel separation
30dB or better at 1kHz
Compliance
Approx. 12 x 10-6cm/dyne at 100Hz
Vertical tracking angle
20 degrees
Cartridge body
One-piece machining from solid 6063 aluminium billet, partially non-parallel shaping, body threaded directly for mounting screws
Cartridge mounting screws
2.6mm 0.45 pitch JIS standard
Distance from mounting holes to stylus tip
9.5mm
Cartridge weight (without stylus cover)
7.3g
Recommended tracking force
1.7g ~ 1.8g (1.75g preferred)
Recommended load directly into MC phono input
97.6ohm ~ 806ohm (determine by listening, or follow detailed guidelines in user manual)
Recommended load via step-up transformer
5 ~15ohm (step-up transformer’s output must be connected to 10kohm ~ 47kohm MM-level RIAA input, preferably via short, low-capacitance cable)
Recommended tonearms
High-quality pivoted or linear (tangential) tonearms with rigid bearing(s), adjustable anti-skating force, preferably VTA adjustment
-
Free Delivery within Mainland UK.
60-Day Money-back Guarantee
Returns Policy
Lyra Delos MC Cartridge
A major problem with most cartridges, but not the Lyra Delos MC Cartridge, is that the signal coils are located so that applying normal tracking force restricts performance.
The reason is that the cartridge’s signal coils should have the same angle as the magnetic circuit when the tracking force for playback is applied, but are nearly always designed so that applying normal tracking force pushes the signal coils out of alignment with the magnetic circuit. This impairs the sensitivity and linearity of the coils, and reduces the quality of sound.
The Lyra Delos MC Cartridge solves this problem with a new body structure and pre-angled damping system. The pre-angled dampers work together with the angle of the body structure so that, when tracking force is applied, the signal coils are optimally aligned with the magnet circuit.
The Delos also has a microridge stylus for outstanding tracking, a non-parallel solid metal body for low resonances, and nude construction for greater clarity. The result is clearly improved sound quality, particularly resolution, dynamic range, transient impact and immediacy.
About Lyra
Based in Tokyo, LYRA is headed by Stig Bjorge from Norway, with American design engineer Jonathan Carr, and Japanese master craftsman Yoshinori Mishima making cartridges and supervising production.
All products are manufactured in Japan with microscopic attention to detail under the direct supervision of these three. LYRA products are characterized by advanced design engineering allied with Japanese artisanal craftsmanship and build quality. All our products are developed and crafted to be among the very finest available in their category.
Every detail of each LYRA product is thought through and executed with extreme care. LYRA is one of the few audio companies with truly original design development capability. Each new product is designed from the ground and up and introduces meaningful industry-leading advances.
